产品概述 Product overview

欧式电缆分接箱是近年来广泛用于电力配网系统中的电缆化工程设备，它的主要特点是双向开门、利用对接套管作为连接母排，具有长度小、电缆排列清楚、三芯电缆不需大跨度交叉等明显优点。其所采用的电缆接头符合 DIN47636 标准。

一般采用额定电流 630A 螺栓固定连接式电缆接头。

European-style cable tap box is widely used in cable engineering equipment in power distribution network system in recent years. Its main features are bidirectional door opening, using butt-joint sleeve as connecting busbar, and it has obvious advantages such as small length, clear cable arrangement, no need for large span crossing of three-core cables, etc. The cable joints adopted conform to DIN47636 standard.

Generally, the rated current 630A bolt is used to fix the connected cable connector.

正常使用环境 Normal operating environment

环境温度：最高气温：+40℃，最低气温 -30℃

风速：相当 34m/s（不大于 700Pa）

湿度：日相对湿度平均值不大于 95% ，月相对湿度平均值不大于 90%

防震：水平加速度不大于 0.4m/s2

 ，垂直加速度不大于 0.1 5m/s2

安装地点倾斜度：不大于 3°

安装环境：周围空气应不受腐蚀性、可燃性气体、水蒸气等明显污染，安装地点无剧烈震动。

订购本产品超出上述条件规定时，请与本公司协商。

Ambient temperature: maximum temperature: +40℃ , minimum temperature -30℃

Wind speed: equivalent to 34m/s (not more than 700Pa)

Humidity: the average daily relative humidity is not more than 95%, and the average monthly relative humidity is not more than 90%

Earthquake prevention: horizontal acceleration is not more than 0.4m/s2

, vertical acceleration is not more than 0.1 5m/s2

Inclination of installation site: no more than 3°

Installation environment: ambient air shall be free from obvious pollution such as corrosiveness, combustible gas and water vapor, and the installation 

site shall be free from violent vibration.

Please consult with our company when ordering this product beyond the above conditions.